Hello! Welcome to Hitfar Induction Heating Machine!Email to admin@hitfarltd.com
Contact Us
Service Hotline
+86-137-90228018
Add:Weiye Road No.16, Lianhu Industrial Zone, Tangxia, Dongguan,Guangdong,China
ZG-HFW-F1200 diamond blade high frequency induction heating brazing machine
Author:admin Date:2018-09-26
ZG-HFW-F1200 diamond blade high frequency induction heating brazing machine
diamond blade segment brazing machine by high freqency induction heating

Technical Parameters:
NO. MODEL NO: ZG-HFW-FA1200
1 BRAZING RANGE: DIAMETER 350~1200MM 
2 VERTICALITY : ≦0.03MM
3 FACE RUNOUT : ≦±0.03MM
4 INPUT VOLTAGE: 220V-1P, 50/60HZ
5 MOT0R POWER: 0.75KW
6 LOADING: 100%
7 AIR SOUNRCE PRESSURE : 0.5-0.8MPA
8 COOLING WATER PRESSURE: ≧0.2MPA
9 COOLING WATER FLOW: 2-5L/MIN
10 N.W.: 210KG
11 DIMENSION: 850*650*1550MM3
 
diamond blade induction brazing
The welding brazing of the steel stone cutter head and the circular saw blade, that is, the steel sheet base, is an extremely important processing procedure in the production of the saw blade. It requires sufficient welding strength and welding position precision. The cutter head has the same edge and cannot be the slightest. Skew; high-frequency welding instant heating time is fast; temperature should also be precisely controlled, not too high, generally around 700 °C, that is, the melting temperature of the silver soldering piece, and if the temperature is too high, it can cause deformation of the substrate.
 
In the late 1990s, a large number of portable transistor high-frequency induction welding equipment appeared in the country to replace the traditional bulky tube high-frequency induction welding equipment. Due to its light weight, energy saving and low price, it quickly appeared in many saw blade production plants and stone. Processing manufacturers have received rave reviews and widely applied to date. However, in fact, most manufacturers of high-frequency welding machines provide only one high-frequency induction heating equipment, other welding fixtures, base mounting frames and cutter head pairs. Quasi-institutions, etc., need to be customized. If there is no customized device, the quality of the welding head depends on the experience and skill of the operator. There are several standard models of Hitfar Machinery that have been configured. Welding fixtures and racks, because the rack is a custom product, the general customer orders after the production.
high frequency induction brazing machine
The principle of induction welding of high-frequency saw blade: Since the blade of sintered powder is a cutter body, it is placed in the middle of the induction coil made of hollow tube, the hollow tube is cooled by water, and the two ends of the induction coil are connected with the high-frequency power supply. When the high-frequency circuit passes through the induction coil, according to the principle of magnetic block formation of the linear current, the most dense magnetic lines are formed in the narrow loop section of the induction coil and the straight sides of the cutter head, and the magnetic flux passes through the cutter body to generate current. The self-heating of the body itself. Also due to the skin effect of the high-frequency current, the induction coil is in the high-frequency alternating magnetic field, the higher the operating frequency, the denser the current is on the surface of the cutter head, so the high-frequency induction heating, the temperature rises rapidly, Welding speed and anger, usually a welding head needs 3~5s.

Hitfar Power Technology Co., Ltd.

Lianhu Industrial Zone, Tangxia,Dongguan, China

Technial Support:HITFAR INDUCTION